We know that barbecues are available in three types: electric, fossil fuel and charcoal. This article discusses fossil fuel barbecues. Before examining this, we need to know the following. Stay safe with the flame.
What is city gas?
This gas, which is known as urban gas, is the same gas that is provided to consumers in urban pipelines. This gas is a combination of methane, carbon dioxide, hydrogen, carbon monoxide, nitrogen, hydrochlorides and some impurities. The scientific name of this gas is coal gas or synthetic gas.
What is liquefied petroleum gas?
Liquefied petroleum gas (LPG) is a combination of butane and propane gases that are stored in a liquid state. This gas also contains some other compounds such as propylene and butylene, which are very small. This gas has many uses. From being used as a car to as a cooling gas in refrigeration equipment.
These barbecues are available in three types of liquefied petroleum gas, city gas fuel and dual fuel, each of which is suitable for one type of consumption. There may come a time when you prefer to change the fuel used by your barbecue. For this you need to know the structure of gas grills.
For gas barbecues in two types of liquefied gas and city gas is the same. Based on the fuel path, we examine the structure of these barbecues. It should be noted that this test is performed on the simplest mode and the order of steps or the number of parts may be different for other devices. First there is the gas inlet interface that enters the gas system. In the gas transmission path, it first collides with the adjusting screw or valve and then reaches the gigolar, and at the end of the path, it reaches the burner and burns.
What is an adjustment valve?
The adjustment valve or adjustment page is a mechanical part that is used to adjust the amount of gas entering the burner to adjust the amount of heat and flame according to our needs.
What is a zhiglore or a nozzle?
These pieces, which are generally the last pieces before the burner, are brass pieces that have a thread and are closed at the end of the path and use the hole they have to pass the gas. The hole diameter of these parts is designed to be an automatic adjustment on the fuel path. For example, 70 and 80 jiglours that are used for city gas in such a way that the 70 nozzle is for the high flame and the 80 nozzle is for the low flame. Each fuel has its own hole diameter.
Use of liquid gas for barbecue
Now that you are relatively familiar with the structure of the fuel path of a grill and its parts, it is time to explain this issue in detail. If you have a liquefied gas grill or a double-burner grill, you do not have any problems, but you may want to use your urban gas grill using liquefied gas. For this, you cannot use the same old system. For this, you have to replace your barbecue nozzle with a gas nozzle. For this, you must first access the back of your grill, then open the upper frame to reach the burner and the jugular, now open the city gas jugular using the appropriate tool and use liquid gas jugular instead. Make sure that the jugular is strong and put the opened parts back in place and close them. Now your barbecue is ready and you can use liquid gas as its fuel.