Spare parts and consumables for industrial stoves There is a hypothetical triangle in each kitchen that is needed for cooking. The three vertices of this triangle are the refrigerator, the stove and the sink from which no kitchen is free. The same is true in industrial kitchens. Of course, there are differences in the type of equipment. For example, instead of refrigerators, they use larger storages, instead of small stoves, they use industrial stoves, and large sinks or industrial dishwashers. This article examines industrial stoves and their consumables. Basically, the difference between an industrial gas stove and a domestic gas stove is that the power of the flames and the amount of heat are different, and the construction material of each gas stove is different from that of other gas stoves. These differences are rooted in the difference in weight of the cookware in each case. Industrial stove components: Most industrial stoves have the same parts as household stoves and the only difference is in their power and capacity. Of course, depending on the production company and the model you want, some of these parts may not exist. The components of an industrial stove are: • Body • Insulation • Multi-way • Lions • نازلها • Interface chamber or pipes • Torches • Candles (pilot) • Thermocouple • Lighter • Thermostat • Temperature adjustment • alarm clock • Grill These 14 pieces are the main pieces. Below are the problems in each of them. Body: The biggest danger that threatens the body is the burn or glaze of the stove and its rust. Of course, if the gas stove you provide has a steel body, this problem will not arise for you anymore. Insulation: Insulators are placed around the stove and generally in the walls of the oven, and their role is to control the heat transfer of the oven to the outside as well as to keep the heat in the oven to reduce energy consumption. These insulators generally do not suffer much damage, so you can be somewhat confident that this part will not be a problem. Multi-way: This section is located below the cooking page and you must have access to this section to view them. Generally, this part does not have a particular problem, but it may be a problem due to the poor build quality of the part during construction or due to improper assembly, in which case you can easily replace this part. Lions: One of the parts that are prone to high failure is the control valves. These valves are generally wasted due to overuse and need to be replaced. These valves are also among the parts that you can prepare and replace. Nozzle: A nozzle or jiggle or piston is a piece that injects fuel into the flame. This part is in the first row of gas stove replacement parts, and this is important because these jigsaws have a very small hole that can not be used if this hole is closed or widened, and it must be replaced. . It should be noted that if there is no secondary fuel for the burner but your stove is smoky, the problem is probably the same jiggle. Torch (flame head): This part generally does not have any special problems and only in rare cases due to the poor quality of the casting may it explode, at which time the flame head should be replaced. Thermocouple: Thermocouples are thermometer components and play a safety role in gas stoves. Their job is to close the gas valve with their control system when the flame goes out and prevent gas from waiting in the environment. If this system has a problem, you should replace this thermocouple with a thermocouple of the same type. The other thing that usually gets in trouble is the lighter section. This section is flawed for two reasons