Why is the flame of the stove low?

To heat food, your stove releases gas that ignites into flames of heat. The gas is released in a uniform and steady stream that produces uniform flame and heat. As you turn up the knob on your home or industrial gas stove, the flame should increase or decrease depending on the heat requirement. However, if you keep raising the flame and the flame just flickers or even goes out, there is a problem with your domestic or industrial gas stove. In fact, a weak flame in a gas stove is a common problem that can be caused by various factors. In this article, we will point out the possible causes of a weak flame in a gas stove and provide solutions to help solve this problem. So stay with us.

The reasons for the weakening of the flame in the gas stove

There are several potential reasons for a weak flame in a gas stove, which we mention below.
1- Dirt on the flame head: the most common cause of blockage or clogging of the burner is dirt. This problem can be caused by food particles, grease or other debris that has built up in the flame over time. In fact, the torch is surrounded by small grooves that allow the gas to escape and ignite. However, these gaps are prone to becoming blocked by fat and other food particles. While you may think that the flames will eventually burn these fats and particles, it is not the case. So when multiple holes on the burner are blocked, your stove will light more slowly and you will likely have weaker flames.
2- Faulty ignition: Another possible reason is a faulty ignition. If the igniter is not working properly, it can cause the flame to weaken or fail to ignite.

3- Faulty control valve: The control valve in your gas stove is responsible for controlling the gas pressure. This is what allows you to self-control the power of the flame in different settings on the stove. If you notice that the flame on your stove is flickering or you can not change the power of your stove flames, the control valve may be faulty and needs to be replaced.
4- Defective cap: Every burner on a domestic and industrial gas stove has a burner head that is attached to your gas stove and contains the components that make up the flame, as well as a burner cap that sits on top of it. If the burner cap is not in the right position, it can show low flame; Because enough gas cannot escape due to obstruction. If the cap is uneven, you may notice that one side of the flame is higher than the other. In many cases, when the cap is not in the right position, the burner will also have trouble lighting and may take a long time to light.
5- Gas leak: In addition, a weak flame can be caused by a gas leak. If there is a leak in the gas line, it can cause the flame to weaken or the domestic gas or industrial gas to not ignite.
6- Faulty regulator: Finally, a weak flame can be caused by a faulty regulator. The regulator controls the flow of gas to the stove and if it does not work properly, it can cause the flame to weaken.

Solutions to fix the weak flame in the gas stove

There are various solutions that can be used to fix a weak flame in a gas stove. The first solution is to clean the burner. This can be done by removing the burner and cleaning it with a brush or soft cloth. Additionally, the burner should be checked for any clogging or clogging that may be causing a weak flame. If the spark plug is the cause of the weak flame, it should be replaced. In addition, if there is a gas leak, it should be repaired as soon as possible. Finally, if the regulator is the cause of the weak flame, it should be replaced. Also, if the spark plug and cap are faulty, you should repair them.
Conclusion
Weak flame in domestic and industrial gas stoves can be caused by various factors. The most common causes of a blocked or clogged burner are a faulty igniter, gas leaks and a faulty regulator. There are various solutions that can be used to solve this problem, such as cleaning the burner, replacing the igniter, repairing any gas leaks, and replacing the regulator. By following these solutions, the problem of weak gas stove flame can be solved.