Why does the stove burn red?

 If you are using domestic gas or industrial gas, you should note that the color of the flame is usually blue. However, you may experience a change in the color of your stove. For example, the red color of the gas stove flame can be dangerous. Changing the color of the flame to red is actually a bad sign and indicates a problem with your gas stove. In this case, immediately stop using the gas stove and repair it. In this article, we will discuss why the gas stove flame may turn red and what solutions there are to prevent this from happening.

The reasons for the red gas flame

There are several reasons why a domestic or industrial gas stove burns with a red flame. We mention these reasons below.
1- Improper ventilation: the most common cause of flame redness is lack of proper ventilation. When a stove is not properly ventilated, gas can collect in that area and cause the flame to burn hotter than usual. This can cause the flame to turn red, which indicates that the stove is not being used safely.
2- Burner failure: Another reason why the gas stove may burn red is the burner failure. If the burner is not working properly, it will cause the flame to burn hotter than usual. This problem can also cause the flame to become red.
3- Spilling food: If food and drink spills on the pot and on the burner. The color of the flame may change. For example, you have all had the experience of spilling milk when you least expect it. In fact, burning food particles may cause a red flame on your home or industrial gas stove burner.
4- Excessive production of carbon monoxide: excessive production of carbon monoxide that accumulates as a by-product of the combustion of any fuel, which causes a change in the color of the flame. In general, if the gas burns with a blue flame, the gas equipment will work perfectly and emit a small amount of carbon monoxide. But if the color of the flame is closer to red, this toxic substance becomes more and more. This is very dangerous because it leads to headache, nausea, dizziness and other symptoms of poisoning.
5- High gas pressure: Finally, if the gas pressure is too high, the gas stove may turn red. In fact, it causes the flame to burn hotter and redder than usual.

What are the solutions to prevent the red flame of the gas stove?

There are various solutions to prevent the flame of the gas stove from turning red, which we mention below.
1- The first solution is to ensure proper ventilation of the oven. This can be done by opening a window or using a fan to remove gas from the stove.
2. The second solution is to check the burner for any signs of failure. If the burner is not working properly, it will cause the flame to burn more than usual and become red. In this case, the burner must be replaced or repaired.
3- The third way is that if food is spilled on your home or industrial gas stove, clean it quickly.
4- The fourth way is that it is better to check your gas stove equipment from time to time and repair it if it needs to be repaired.
5- Finally, if the gas pressure is too high, it can cause the flame to burn more than usual and become red. To prevent this from happening, the gas pressure must be adjusted to the appropriate level.

What characteristics should the gas flame have?

Therefore, in order for the gas to burn as completely as possible and to release the necessary energy, it is important to have enough air in the gas mixture. This is created by mixing oxygen and burning gas in the burner in the right proportion.In fact, 10 liters of air are needed for every 1 liter of gas. Having said that, below we mention some of the signs that indicate the health of the gas flame.
• Gas burns silently.
• The color of the flame should be blue.
• The flame is evenly distributed on each side of the burner.
• The flame of the gas stove can be adjusted.
Conclusion
In general, the stove may turn red for various reasons. The most common reasons for lack of proper ventilation are incorrect operation of the burner and high gas pressure. To prevent the stove from burning red, it is important to ensure that the stove is properly ventilated, the burner is working properly, and the gas pressure is at the right level. By following these steps, you can ensure that your stove is safe and efficient.